SW London Plumbing Services


Archive for 2012

Plumbing in SW London: A story about Plumbing

Plumbing is the system of pipes and drains installed in a building for the distribution of potable drinking water and the removal of waterborne wastes, and the skilled trade of working with pipes,tubing and plumbing fixtures in such systems. A plumber is someone who installs or repairs pipingsystems, plumbing fixtures and equipment such as water heaters. The plumbing industry is a basic and substantial part of every developed economy due to the need for clean water, and proper collection and transport of wastes.[1] The word “plumbing” comes from the Latin plumbum for lead, as pipes were once made from lead.

Plumbing is usually distinguished from water and sewage systems, in that a plumbing system serves one building, while water and sewage systems serve a group of buildings or a city.Plumbing fixtures are exchangeable devices that can be connected to a building’s plumbing system.

Plumbing was extremely rare until the growth of modern cities in the 19th centuries. At about the same time public health authorities began pressing for better waste disposal systems to be installed. Earlier, the waste disposal system merely consisted of collecting waste and dumping it on ground or into a river.

Posted in: Blog, News

Leave a Comment (0) →

Plumbers in your area SW London/ Clapham, Balham,Wimbledon

Today’s high efficiency boilers can save you a small fortune on your heating bills, particularly if your boiler is over ten years old. Modern boilers are smaller, neater and the latest technology allows for improved efficiency and flow rates.

SW London plumbing and Heating services only fit the leading brand of modern boilers, such as Ideal, Baxi, Vaillant and Worcester and as boiler replacement is one of our key services, we can offer our boiler replacement service at keen, value-for-money prices.



Posted in: Blog, News

Leave a Comment (0) →

24 Hour plumbing and heating servicing offered all over London



SW London plumbing and heating services are based in the City and South West, as the name of the company suggests and are capable of handling all types of central heating and plumbing jobs, irrespective of the size of the project.

Whether you have a leaky tap, your drains are blocked, you need a new boiler installed, you are considering fitting a complete central heating system or you need to find out why your radiator is hot at the top and cold at the bottom, as long as you are within the London area.

Posted in: Blog, News

Leave a Comment (0) →

Efficiency and Showers

Most people agree that it uses less water to take a shower than a bath, although that is often not the case if you have a power shower. Even so, a shower does use a great deal of water and, as a large number of people shower every day, a water saving shower head could you save a lot of water and money! The term water saving shower head can actually mean a few different things but all the alternatives will save water.

An aerated water saving shower head will restrict the water flow therefore using less water during your shower. These are not suitable for electric showers, however, but are available from most DIY or plumbing stores. It would be worth discussing the options with the salesperson at your chosen store to ensure that you don’t end up with a very weak shower which would probably only result in you spending twice as long in there anyway!

Instead, a different type of water saving shower head simply reduces the flow rate, or, finally, the alternative to a water saving shower head such as these is to fit flow restrictor to the flexible hose of the shower head. These are suitable for showers with mains pressure and not electric showers.

Bear in mind that a conventional shower uses about 35 litres of water so reducing this by even, say, 10%, would save almost 1300 litres of water a year if you showered daily. By spending a relatively small amount on some form of water saving shower head you could make massive water savings, and reducing the length of time you spend in the shower will also make a real difference.

Courtesy of 

Envirowise 2011

Posted in: Blog, News

Leave a Comment (0) →

Copper Benefits For Using Copper Tubing For Mechanical Systems

Copper Benefits For Using Copper Tubing For Mechanical Systems

In large diameters or small, for liquid or gas, for high- or low-pressure systems under a wide range of temperatures, you can depend on copper and reduce costs for any mechanical system.



Standardize on copper for superior performance throughout the job. Copper is easy to work and has excellent thermal conductivity, corrosion resistance and durability. It is available in two basic types of tube—plumbing tube and air conditioning/refrigeration (ACR) tube, and in both drawn (hard) and annealed (soft) tempers. Copper tubing is also available in a wide range of diameters (from 1/8 inch to 12 inches) and wall thicknesses. Fittings to suit every design application are readily obtained.

Variety of Applications

In mechanical systems of all kinds, copper does more than ever before. Today copper tube has proven superior for:

  • Underground water and gas services
  • Water distribution systems
  • Chilled water mains
  • Drainage and vent systems
  • Heating systems (including solar)
  • Fuel-oil systems
  • Oxygen systems
  • Non-flammable medical-gas systems

Moreover, copper is durable enough to embed in concrete without worry.

Wide Range of Sizes

Large diameter or small, there is a copper tube to fit every specification. Forced-circulation hot water heating systems use small and economical tube sizes with soldered joints and require less space for installation. In drainage systems, Type DWV tube has been used successfully for many years. Large-diameter tube, joined by soldering or brazing, is cost-effective for water distribution and for fire-protection risers in multistory buildings. Copper’s superior hydraulic-flow characteristics permit precise tube and pump sizing.

Problem-Free Performance

It is good engineering practice to use one material for all components throughout a mechanical system. The more copper used in an installation, the more you can count on dependable performance. Copper is known for its reliability. It has been used for plumbing and mechanical systems since metals were first employed in these applications. And its popularity in heating systems is a further indication of copper’s superiority to alternative materials.

Long Lasting and Maintenance Free

Copper has stood the test of time to earn customer satisfaction and wide code acceptance. Copper, used for centuries, has gained new popularity in its modern form: light, strong, corrosion-resistant tube. Its long-lasting and maintenance-free characteristics make copper the leading choice for plumbing, heating, cooling and other mechanical systems. Copper never requires painting for protection from corrosion. In addition, a thin film forms inside the tube, providing natural protection from corrosion. Copper’s trouble-free service means satisfied customers. And its universal acceptability assures compliance with major building codes. Copper is safe, too. It will not burn or support combustion. So it will not carry fire through floors, walls and ceilings, and it will not decompose into toxic gases.

Corrosion Resistance

Copper’s excellent corrosion resistance is an important reason for its choice in so many applications. Solar energy systems, for example, benefit from copper’s resistance to both atmospheric and aqueous corrosion. For water distribution and fire sprinkler systems, copper tube’s internal corrosion resistance results in superior flow capacity. When calculating flow capacities, other plumbing materials require additional allowances for corrosion, scaling, out-of-roundness and smaller internal diameter when compared size-to-size with copper. Copper tube bores remain smooth, and internal diameters stay constant. Largely because of this, a copper fire sprinkler system can use smaller diameters to provide the same sprinkler coverage as a steel system—with significant savings in installed costs.

High Thermal Conductivity

Copper conducts heat up to eight times better than other metals. In any application involving heat transfer—from radiant heating to snow melting to direct exchange, geothermal pump systems—copper’s high thermal conductivity provides an advantage. Comparing copper, aluminum and steel, copper is by far the best conductor of heat. In solar energy systems, copper’s superior thermal conductivity means that thinner copper sheet can collect the same heat as a much thicker-gauge sheet of aluminum or steel. And it means that copper collector tubes can be more widely spaced.

Easy to Join and Install

Copper adds to system integrity while lowering installation costs. Copper’s workability can cut installation time and reduce labor cost. Tubes and fitting are easily joined metallurgically by soldering or brazing. And copper is so ductile that it can be formed—frequently right on the job site—to fit most design configurations. Because of copper’s formability, it is often possible to eliminate elbows and joints. Since copper is rigid as well as readily formable, it adds to total system integrity even when subjected to adverse conditions.

An Abundant Resource

The total of U.S. resources far exceeds the country’s requirements. At present use rates, we still have reserves waiting to be mined that are plentiful enough to last thousands of years. In addition, there’s another naturally occurring advantage that no other metal can match: ease of recycling. Almost half the copper used in this country comes from recycled scrap, which can be used over and over again. This copper recovered from scrap is as usable as primary copper refined from ore. Combining natural abundance with recycling, the USA will remain self-sufficient in copper for countless years to come.


courtesy of http://www.copper.org/applications/plumbing/benefits/benefits_main.html

Posted in: Blog, News

Leave a Comment (0) →
Page 58 of 58 «...3040505455565758